XSCF> shownetwork -a
xscf#0-lan#0
          Link encap:Ethernet  HWaddr 00:0B:5D:E3:52:84 
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:458 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:61598 (60.1 KiB)  TX bytes:1392 (1.3 KiB)
          Base address:0xe000

xscf#0-lan#1
          Link encap:Ethernet  HWaddr 00:0B:5D:E3:52:85 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Base address:0xc000

XSCF> setnetwork xscf#0-lan#0 -m 255.255.255.0 172.20.1.21
XSCF> applynetwork
The following network settings will be applied:
  xscf#0 hostname  :xscf0
  DNS domain name  :com

  interface        :xscf#0-lan#0
  status           :up
  IP address       :172.20.1.21
  netmask          :255.255.255.0
  route            :

  interface        :xscf#0-lan#1
  status           :down
  IP address       :
  netmask          :
  route            :

Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n] :y