XSCF> shownetwork -a
xscf#0-lan#0
Link encap:Ethernet HWaddr 00:0B:5D:E3:52:84
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:458 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:61598 (60.1 KiB) TX bytes:1392 (1.3 KiB)
Base address:0xe000
xscf#0-lan#1
Link encap:Ethernet HWaddr 00:0B:5D:E3:52:85
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Base address:0xc000
XSCF> setnetwork xscf#0-lan#0 -m 255.255.255.0 172.20.1.21
XSCF> applynetwork
The following network settings will be applied:
xscf#0 hostname :xscf0
DNS domain name :com
interface :xscf#0-lan#0
status :up
IP address :172.20.1.21
netmask :255.255.255.0
route :
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n] :y